#6MP Stainless Steel Hose Clamp w/ Zinc Plated Screw 10/box

Product Overview

1/4" Band | Adjustable 9/16" – 1"

The 6MP Stainless Steel Hose Clamp w/ Zinc Plated Screw is a worm-drive clamp engineered for secure retention of small diameter hoses and tubing where corrosion resistance and dependable clamp force are required. Featuring a 300 Series stainless steel band and housing paired with a zinc plated steel screw, this clamp balances corrosion protection with value-focused performance for marine, outdoor, HVAC, industrial, and automotive applications. Its compact size and reliable torque performance make it suitable for electrical contractors, HVAC professionals, marine engineers, and industrial maintenance teams needing consistent hose sealing hardware.

Specifications

• Band Width: 1/4"
• Adjustable Range: 9/16" – 1"
• Material: Band and Housing are 300 Series Stainless Steel
• Material – Screw: Zinc Plated Steel
• Corrosion Resistance: Stainless band and housing resist corrosion; zinc plated screw provides moderate protection
• Performance: All CTU Standard Hose Clamps exceed 60 inch-pounds of torque
• Recommended Installation Torque: 35-45 in.lbs. (4.0-5.1 Nm)
• Compliance: RoHS Compliant – No Hexavalent Chromium (Cr(VI)) Material
• Packaging: Sold in boxes of 10

Performance Advantages

• 300 Series stainless steel band and housing provide corrosion resistance in marine and outdoor environments
• Zinc plated steel screw balances corrosion protection with cost-effective performance
• Adjustable range from 9/16" to 1" covers common small hose diameters
• Exceeds 60 in-lbs torque capability for consistent clamp force under load
• Recommended torque range promotes repeatable clamp tension and sealing
• RoHS compliant with no hexavalent chromium (Cr(VI)) material

Applications

• Marine plumbing and bilge hose securing
• Small industrial fluid transfer hoses
• HVAC condensate and tubing applications
• Automotive coolant and fuel hose assemblies
• Agricultural irrigation hoses
• Outdoor equipment hose assemblies

Installation Notes

• Use a 5/16" slotted screwdriver or compatible nut driver for installation
• Tighten clamp until snug without over-torquing to prevent deformation
• Follow recommended installation torque of 35-45 in.lbs. (4.0-5.1 Nm)
• Ensure the hose or tubing is fully seated before tightening
• For consistent installation torque, see Tools & Equipment collection

Packaging

• Sold in boxes of 10 hose clamps